Dust Fullness Detection for Cleaner Robotic Vacuum Ultraosonic Senor Digital Output

• Type: High Frequency Ultrasonic Sensor
• Output Signal Type: Digital Type
• Production Process: Ceramics
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: HT-U240-D
• Sensitivity: High
• Probe Type: Dual Probe
• Measuring Medium: Air
• Detection mode: Echo Reflection
• IP Rating: IP67
• Certification: RoHS
• Customized: Customized
• Transport Package: 1300PCS Per Package
• Trademark: HTW
• Origin: China
• HS Code: 9031809090
• Production Capacity: 300, 0000/Month
• Package Size: 18.00cm * 10.00cm * 10.00cm
• Package Gross Weight: 0.500kg

Product Description

Appearance can be imitated, but quality can NEVER be imitated

This product is an ultrasonic series dust full detection sensor, suitable for dust box full testing of
sweeping robots. The transmitting probe and receiving probe of this transducer are placed coaxially
and horizontally and utilize the different propagation characteristics of ultrasonic waves of specific
frequencies in air and foreign matter media to achieve monitoring and early warning of the detection
area. This product optimizes the algorithm based on the characteristics and distribution status of foreign
matter in equipment such as sweeping robots. It can accurately monitor the accumulation of foreign
matter in the dust box detection area of the cavity to be tested and output early warning signals

Signal output	When foreign matter accumulation does not reach the specified height: the light goes out
	When the accumulation of foreign matter reaches the specified height: the red light turns on
Sensor alarm signal trigger time	50 ms
Frequency	240±20KHz
Supply voltage	DC 4.8V~5.2V
Working current	≤ 50mA
Power consumption	≤0.3w
Working temperature and humidity	-10ºC~50ºC / 0~98% RH (non-condensing)
Storage temperature	-20ºC~80ºC (non-condensing)
Installation requirements	1. The transmitting probe and the receiving probe are installed parallel to each other on the same axis, with an angle of 180° ± 2°; 2. The ultrasonic probe needs to be installed on the side wall of the cavity to be tested, and the working plane of the probe should be flush with the inner side of the cavity to be tested;   3. The probe installation distance range needs to be between 100mm and 220mm;   4. The connection pin of the probe module needs to be connected to the spring contact on the customer's equipment;
Shelf life	>3 years

Contact us if you have questions or concerns, we are one of the top manufacturers focusing on piezo materials and ultrasonic sensors in China